ICG stocks the following fasteners in natural 6/6 Nylon
(UV Black and Colors available):
BOLTS & SCREWS:
Phillips Pan Head Machine
Screws
Slotted Pan Head Machine Screws
Slotted Fillister Head Machine Screws
Slotted Round Head Machine Screws
Slotted
Flat Head Machine Screws
Head Hex Cap Screws
Knurled Thumb Screws, Standard and
Economy
Socket Head Cap Screws
Set Screws: Grub, Slotted and Hex
Nylon Threaded Rod and Studs
WASHERS:
Flat Washers (including NAS and MS part numbers)
Shoulder Washers
Finishing Washers
Retaining Washers
Please note: to view all washer sizes that are
available, please download the washers4.pdf
file, as only a fraction of the available sizes are
listed on the web page.
When making inquiries for nylon
washers, please advise the following specifications: Part Number,
color, outside diameter, inside diameter & thickness. Nylon washers are
stocked in natural color; black is available as are a limited number of colors,
subject to minimum order quantities.
NUTS:
Finished Hex Nuts
Locking Nuts
Wing Nuts
Knurled Thumb Nuts
Acorn
/ Cap Nuts
Hex Jam Nuts
NYLON "P"
CLAMPS:
Natural and Black nylon clamps
are offered in 3/8" and 1/2" widths, from 1/8" through 1-1/2" internal diameters and
can be affixed with either #8 or #10 screws, depending non part number.
Clamps are made to commercial as well as NAS 1397 specifications;
please specify when ordering. A limited number of colors are also
available at a minimum run of 5,000 pieces per color; please inquire for further
details.
SPACERS:
Stocked in natural nylon, they are also available in UV
black as well as colors, subject to minimum order quantity.
Tapped Round Female Spacers
Tapped Hex Female Spacers
Untapped round nylon spacers
OTHER NYLON HARDWARE ITEMS:
Panel and Chassis Hardware
Stud buttons
Push-in fasteners
Twist locks
Bushings
Wire
Gates
Nylon Drive Rivets
Please note that complete information on any of these items can be obtained by going to our ICG Catalog page, then downloading the catalog section file that pertains to the product group(s) you are interested in.
We can also produce nearly any of our nylon hardware items in
several COLORS (subject
to order quantity minimums) For pricing and/or inquiries,
e-mail us at:
sales @icgcorporation.com
or fax
us at 425.315.0201.
When making inquiries, please include the part number (or all relevant dimensions and specifications) as well as the
quantities desired. |